Comand Help

[kevscl600amg]

I am haveing a problem with a comand i fit yestaday it is a non can ind i have fit it into my clk320 cab i have found the speed pulse in the pasanger sill on a blue plug a green wire with a blake stripe i have cheked it ind when the car is in motion it pulses and i have conected it to p1 and 6 and it wont update the position of the car i now have no hair left to pull out ??? :eek:

[steve_bcs]

It could be a faulty comand - I have been unlucky enought to have had a couple of dodgy ones.

Asuming it isnt faulty for now, which connector plugs have you connected the speed pulse to?

[kevscl600amg]

Pin1 And Pin 6 On C2 I Think This Is Corect

[splang]

dont know it this will help - but when I installed mine I found the speed pulse wasn't working.

I reconnected the wires to the command without the clip fitment - just plugging in using the black plastic part but not the 'wing' which locks it in place. It then worked fine -- clearly the clip wasn't clipping properly.

Hope this helps.

Steve
:)

[Alfie]

I am haveing a problem with a comand i fit yestaday it is a non can ind i have fit it into my clk320 cab i have found the speed pulse in the pasanger sill on a blue plug a green wire with a blake stripe i have cheked it ind when the car is in motion it pulses and i have conected it to p1 and 6 and it wont update the position of the car i now have no hair left to pull out ??? :eek:

How many satellites do you see?
Are you sure your antennae is working correctly?

[kevscl600amg]

7 sats and puts up the deg location so it aint that maybe its good for a door stop buy an mp3 player and a tomtom

[Alfie]

7 sats and puts up the deg location so it aint that maybe its good for a door stop buy an mp3 player and a tomtom

How did you check that the speed pulse is 'pulsing'?

I am having a similar problem except that my speed pulse is not connected (cant find it!) but mine does update my position occasionally, about once per mile!

[Alfie]

Pin1 And Pin 6 On C2 I Think This Is Corect

It should be pin 1 of the A plug and pin 6 of the C2 both connected to the speed pulse.

[kevscl600amg]

ok chaps thats fixd it my car is a 2002 clk cab the wire for the speed pulse is in the ns sill remove the sill top open the black trunking in the front pat at the botom is a big blue plug with 4 wires on it its the green with a black stripe
have fun :bannana:

[Alfie]

ok chaps thats fixd it my car is a 2002 clk cab the wire for the speed pulse is in the ns sill remove the sill top open the black trunking in the front pat at the botom is a big blue plug with 4 wires on it its the green with a black stripe
have fun :bannana:

Found mine tonight also!

I'll solder a tap onto it tomorrow.